8353ci / 7353ci Light Production (Color)
+ High Speeds up to 83 ppm B&W & 70 ppm Color
+ 10.1” Color TSI – Intuitive User Interface
+ High Quality Output at 1200 x 1200 dpi
+ Media Capacity (std/max): 4,150/7,650 sheets
+ HyPAS-enabled, and KNM & KFS Ready
+ Standard 270 sheet DSDP and Scan Extension Kit (A) – Searchable PDF
+ Standard Data Security Kit (E)
+ High Yield Toner – Up to 85K in Black & 40K in Color
Click below to download PDF.
Fixing black lines on copies
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
9003i / 8003i / 7003i Light Production (B/W)
+ High Speeds up to 90 ppm B&W
+ 10.1” Color TSI – Intuitive User Interface
+ High Quality Output at 1200 x 1200 dpi
+ Media Capacity (std/max): 4,150/7,650 sheets
+ HyPAS-enabled, and KNM & KFS Ready
+ Standard 270 sheet DSDP and Scan Extension Kit (A) – Searchable PDF
+ Standard Data Security Kit (E)
Click below to download PDF.
Fixing black lines on copies
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
70/60/50/40/35/2554 Series (Color)
The Kyocera Evolution Series
+ High Speeds up to 70 ppm Color & 70 ppm B&W
+ Media Capacity (std/max): 1,150/7,150 sheets
+ 10.1” Color TSI – with new User Interface
+ New Productive Finishing Options include Insertion, Z-Fold, Booklet and Trifolding
+ HyPAS-enabled, and KNM & KFS Ready
+ Enhanced Security & Standard Data Security Kit
Click below to download PDF.
Fixing black lines on copies
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
70/60/50/4004 Series (B/W)
The Kyocera Evolution Series
+ High Speeds up to 70 ppm B&W
+ Media Capacity (std/max): 1,150/7,150 sheets
+ 10.1” Color TSI – with new User Interface
+ New Productive Finishing Options include Insertion, Z-Fold, Booklet and Trifolding
+ HyPAS-enabled, and KNM & KFS Ready
+ Enhanced Security & Standard Data Security Kit
Click below to download PDF.
Fixing black lines on copies
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
508ci/ 408ci/ 358ci (Color)
+ High Speeds up to 52 ppm Color & B&W
+ Media Capacity (std/max): 600/3,100 sheets
+ 7” Color TSI – Intuitive User Interface
+ High Quality Output at 1200 x 1200 dpi*
+ HyPAS-enabled*, and KNM & KFS Ready
+ Enhanced Security and Standard Data Security Kit*
Click below to download PDF.
Fixing black lines on copies
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
MZ 4000i/ MZ3200i (B/W)
+ High Speeds up to 40 ppm BW
+ High Quality Output at 1200 x 1200 dpi
+ 10.1” Color TSI – with new Simplified User Interface
+ Enhanced Security & Standard Data Security Kit
+ HyPAS-enabled, and KFS Ready
Click below to download PDF.
Fixing black lines on copies
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
M8130cidn/M8124cidn (Color)
+ Speeds up to 30 ppm Color & B&W
+ High Quality Output at 1200 x 1200 dpi*
+ 7” & 4.3″ Color TSI – Intuitive User Interface
+ Media Capacity (std/max): 600/1,600 sheets
+ Standard 50 sheet RADP
+ HyPAS-Capable & KFS Ready
+ SMARTech Design
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
M4132idn/ M4125idn (B/W)
+ Speeds up to 32 ppm B&W
+ High Quality Output at 600 x 600 dpi
+ 7” & 4.3″ Color TSI – Intuitive User Interface
+ Media Capacity (std/max): 600/1,600 sheets
+ Standard 50 sheet RADP
+ HyPAS-Capable & KFS Ready
+ SMARTech Design
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
M6635/M6630/M6235/M6230cidn (Color)
+ Speeds up to 37 ppm Color & B&W
+ High Quality Output at 1200 x 1200 dpi*
+ 7” Color TSI – Intuitive User Interface
+ Media Capacity (std/max): 350/1,850 sheets
+ HyPAS-enabled, and KNM & KFS Ready
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
M3660/M3655/M3645/M3145idn (B/W)
+ Speeds up to 62 ppm B&W
+ 7” Color TSI – Intuitive User Interface
+ Media Capacity (std/max): 600/2,600 sheets
+ HyPAS-enabled, and KNM & KFS Ready
+ Data Security Kit (E) –
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
M5526/M5521cdw (Color)
+ Speeds up to 27 ppm Color & B&W
+ High Quality Output at 1200 x 1200 dpi*
+ Up to 4.3″ Color TSI – Intuitive User Interface
+ Media Capacity (std/max): 300/550 sheets
+ Standard Wireless & Wi-Fi Direct
+ KFS & KNM Ready
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver
M2640/M2540dw (B/W)
+ Speeds up to 42 ppm B&W
+ High Quality Output up to Fine 1200 dpi
+ Up to 4.3″ Color TSI – Intuitive User Interface
+ Media Capacity (std/max): 350/850 sheets
+ HyPAS-capable (the M2640idw only), and KFS & KNM Ready
+ Standard Wireless & Wi-Fi Direct (excluding the M2040dn)
Click below to download PDF.
Windows
Download the driver and unzip the file. Once the driver is unzipped you will need to run the installation file shown below.
Click on the folder until you see en and open.
Look for the file name KmInstall and double click to open. Windows will ask you if you want to allow this program to make changes, select yes to continue
Once the Program opens click Accept to continue with the installation
Click OK to continue
Click Custom Install
Here you should see your printer show up in the list below, if you do not see your device you can type in the IP address in the box that says “Search Devices”.
MAKE SURE TO USE THE ###.###.###.### STYLE IP ADDRESS.
If the device is still not showing up it means your device is either not connected to the network or is not on the same network your computer is on.
Click on your device and then click the top arrow to add it to the install list
Click “KX Driver” and then click the bottom arrow to add it to the install list
Click Install
Click “No, I do not want to take part in this feature”
Once the install is done click all three boxes so only Print test page is checked and click finish.
Once you verify the test page printed close out of the program and you are all finished.
Download and unzip the file
open the dmg file
select the pkg file
Click continue
Click continue
Click agree
Click Install
Type in your password and click install software
Click close
Open System Preferences and select printers and scanners
Click the plus button
Click add printer or scanner
Select IP
Select IPP in the drop down box and change to LPD
Type in the Ip address of your Copier or Printer
Click under name and change the name to your desired printer name and click add
Select the options your printer has and click ok
You have now finished and able to print using the Kyocera driver